Productos
jueves, 15 de agosto de 2013
Novedades en CADWorx 2014
Extraído del archivo de ayuda de esta nueva versión
Items añadidos y actualizados en el CADWorx Plant Professional 2014
·
The Pipe Support Palette has been changed to
reflect the new Specification Editor Pipe Support changes and the use of
dynamic pipe supports. This option also enables new pipe supports on tees.
·
Tees can now be converted to crosses after
routing by using the grip point on the main of the tee.
·
Reducers can now have branches routed from the
side with the added grip point.
·
Multiple components can now move simultaneously
by using the MOVECOMPONENT command.
·
Tubing can now be stretched and routed from,
similar to other pipe.
·
Center of Gravity has now been updated. All
center of gravity calculations can be completed within a single dialog box.
·
Generic Attach has been updated to include the
BOM Mark Point and the CG Location, enabling you to select a point for the
Center of Gravity.
·
OrthoGen capability has been added to CADWorx.
·
Gaskets, Bolts, and Welds have been enhanced
for appearance. They now appear as they would in a real world environment when
in enhanced mode.
·
There have been ISOGEN identifiers added to the
ISOGEN Export Options for user shapes.
·
You can now set a minimum spacing rule for the
O-Lets.
·
You can now have custom data that is attached
to components appear in the data. As well as isolate components based on this
custom data. A Custom Data button has been added to the Component Edit dialog
box and the Global CEdit dialog box.
·
You can now review changes you have made to a
database when you synchronize by setting the SyncOnStartUp variable to
Synchronize with Changes Review.
·
You can now set the Routing Mode in the CADWorx
Plant Setup.
·
You can now isolate the reverse of the selected
items in the CADWorx Line View palette. You can also manage your isolation in
the Line View Isolation Properties Manager added to the CADWorx Line View
palette. You can set the file created in the Line View Isolation Properties
Manager to a default by setting it in the LineViewIsolationSettingsFile
variable. This also allows you to isolate based on custom data.
·
You can now break pipes into segments and
change segmented pipe to non-segmented pipe. You can now change the elevation
of placed piping in the drawing.
·
You can now generic attach for nozzles using
the ENGENERIC command.
·
You can now enable the RepeatFile in ISOGEN
which enables start and split locations for
consecutive ISOGEN outputs. Set the ISOGENSetting variable to control the import of the repeat file data. The number of sheets is then added to the ISOGEN Data dialog box.
consecutive ISOGEN outputs. Set the ISOGENSetting variable to control the import of the repeat file data. The number of sheets is then added to the ISOGEN Data dialog box.
·
Intersecting piping components can now be
converted. Options are presented to you when a piping component crosses another
component. If you selected None from the list, you can use the CONVERTINTERSECTEDPIPINGS
command to convert the intersecting piping.